Carl Stahl TECHNOCABLES

Workloads cable holder Carl Stahl Technocables

Specification standard suspension ropes

Nominal tensile strength = 1570 N/mm² (stainless steel) & 2400 N/mm² (galvanized steel)
Material = Stainless steel or galvanized steel
Construction = 6x7-WSC
End terminal = Zinc die-cast or pressed out of brass, stainless steel or galvanized steel
Open rope end = Thermally welded

Suspension cables must not be oiled or greased! For ropes with different specification, we don't extend warranty.

 

Working load, rope types and rope diameters

Series 1012

rope-Ø in mmØ 1,00Ø 1,20Ø 1,50Ø 1,80
Galvanized steel, 6x7-WSCSE000491SE000492--
Max. working load (kg)8 kg13 kg--

Working load of cable holders is specified with safety factor 5:1!

Series 1018

rope-Ø in mmØ 1,00Ø 1,20Ø 1,50Ø 1,80
Galvanized steel, 6x7-WSCSE000491SE000492SE000494SE000496
Max. working load (kg)10 kg15 kg22 kg28,5 kg
 
Stainless steel, 1.4401 (AISI 316), 6x7-WSCSE000497SE000498SE000499SE000500
Max. working load (kg)7 kg10 kg19 kg24 kg

Working load of cable holders is specified with safety factor 5:1!

Series 1018 – LOOP

rope-Ø in mmØ 1,00Ø 1,20Ø 1,50Ø 1,80
Galvanized steel, 6x7-WSC--SE000494SE000496
Max. working load (kg)--33 kg40 kg

Workloads apply to loop suspensions only.

Working load of cable holders is specified with safety factor 5:1!

Series 1218

rope-Ø in mmØ 1,00Ø 1,20Ø 1,50Ø 1,80
Galvanized steel, 6x7-WSC-SE000492SE000494SE000496
Max. working load (kg)-13 kg17 kg26,5 kg

Working load of cable holders is specified with safety factor 5:1!

Series 2030

rope-Ø in mmØ 2,00Ø 2,50Ø 3,00
Galvanized steel, 6x7-WSCSE000535SE000536SE000537
Max. working load (kg)40 kg60 kg80 kg

Working load of cable holders is specified with safety factor 5:1!

Series 2030 – LOOP

rope-Ø in mmØ 2,00Ø 2,50Ø 3,00
Galvanized steel, 6x7-WSCSE000535SE000536SE000537
Max. working load (kg)50 kg80 kg110 kg

Workloads apply to loop suspensions only.

Working load of cable holders is specified with safety factor 5:1!

Cart
E-mail
Phone
Contact form