Nominal tensile strength = 1570 N/mm² (stainless steel) & 2400 N/mm² (galvanized steel)
Material = Stainless steel or galvanized steel
Construction = 6x7-WSC
End terminal = Zinc die-cast or pressed out of brass, stainless steel or galvanized steel
Open rope end = Thermally welded
Suspension cables must not be oiled or greased! For ropes with different specification, we don't extend warranty.
| rope-Ø in mm | Ø 1,00 | Ø 1,20 | Ø 1,50 | Ø 1,80 |
|---|---|---|---|---|
| Galvanized steel, 6x7-WSC | SE000491 | SE000492 | - | - |
| Max. working load (kg) | 8 kg | 13 kg | - | - |
Working load of cable holders is specified with safety factor 5:1!
| rope-Ø in mm | Ø 1,00 | Ø 1,20 | Ø 1,50 | Ø 1,80 |
|---|---|---|---|---|
| Galvanized steel, 6x7-WSC | SE000491 | SE000492 | SE000494 | SE000496 |
| Max. working load (kg) | 10 kg | 15 kg | 22 kg | 28,5 kg |
| Stainless steel, 1.4401 (AISI 316), 6x7-WSC | SE000497 | SE000498 | SE000499 | SE000500 |
| Max. working load (kg) | 7 kg | 10 kg | 19 kg | 24 kg |
Working load of cable holders is specified with safety factor 5:1!
| rope-Ø in mm | Ø 1,00 | Ø 1,20 | Ø 1,50 | Ø 1,80 |
|---|---|---|---|---|
| Galvanized steel, 6x7-WSC | - | - | SE000494 | SE000496 |
| Max. working load (kg) | - | - | 33 kg | 40 kg |
Workloads apply to loop suspensions only.
Working load of cable holders is specified with safety factor 5:1!
| rope-Ø in mm | Ø 1,00 | Ø 1,20 | Ø 1,50 | Ø 1,80 |
|---|---|---|---|---|
| Galvanized steel, 6x7-WSC | - | SE000492 | SE000494 | SE000496 |
| Max. working load (kg) | - | 13 kg | 17 kg | 26,5 kg |
Working load of cable holders is specified with safety factor 5:1!
| rope-Ø in mm | Ø 2,00 | Ø 2,50 | Ø 3,00 |
|---|---|---|---|
| Galvanized steel, 6x7-WSC | SE000535 | SE000536 | SE000537 |
| Max. working load (kg) | 40 kg | 60 kg | 80 kg |
Working load of cable holders is specified with safety factor 5:1!
| rope-Ø in mm | Ø 2,00 | Ø 2,50 | Ø 3,00 |
|---|---|---|---|
| Galvanized steel, 6x7-WSC | SE000535 | SE000536 | SE000537 |
| Max. working load (kg) | 50 kg | 80 kg | 110 kg |
Workloads apply to loop suspensions only.
Working load of cable holders is specified with safety factor 5:1!
